Hardware introduction
| Power button | Press and hold the power button for 3 seconds to turn on/off the device. | | Mode Switch | Mode switch disabled due to GAC rules. Device is preset from manufacturer to complain with GAC rules. | | GPS Status Led | Flashing green - GPS Position is fixed.
Steady green - GPS Position is not fixed. | | Memory Status Led | Flashing blue - Memory is 2/3 full.
Solid blue - Memory is full. | | Battery Status Led | Solid red - Device is power on.
Flashing red - Device is in low battery power.
Solid amber - Battery is being charged. | | External Antenna port | For you to connect an external antenna. |
Quick Start
Be sure to get a full charge batteries. For new batteries, make a full charge with a minimum of 7 hours. Device is preset from manufacturer to record 1 sample per second.
Follow this steps to start using your device:
- Turn on device.
- Place your device in the right place. The right place, is the place where better GPS signal your vehicle or plain receives.
- Be sure GPS Status led is blinking (green led). Do not start competition if GPS Status led is steady because device is not recording gps positions.
- Switch off device when finish your track. Your device can record multiple tracks. You don't need to clear device's memory every time you want to record a new track.
- Open FSNavigator.net software to download and clear device's memory.
- Go to Plugins -> FRPocket Device -> Download tracks.
 - Select COM Port where device is connected and start download. Every USB port on your computer has a different COM Port.
- When download finished, you will have tracks loaded in FSNavigator.net. Save desired tracks in GAC format.
- Last step is to clear device's memory from Plugins -> FRPocket device -> Clear memory... ( Select COM Port and clear memory).
| 
